SawStop 10" Tablesaw 7.5HP 3Ph 230v; 52" T-Guide Fence Table

SawStop 10" Tablesaw 7.5HP 3Ph 230v; 52" T-Guide Fence Table
Click To Enlarge
  • Item #: ICS73230-52
  • Manufacturer: Saw Stop
  * Marked fields are required.
Qty*
Price $4,899.00
SawStop has designed this saw to be the best cabinet saw made. The SawStop cabinet saw has all the features you expect in a cabinet saw including: enclosed cabinet, heavy-duty belt drive, cast iron trunnions, and three or five horsepower motors. In addition, the SawStop cabinet saw has a main bearing 50% larger than the Delta Unisaw, a European-style riving knife for improved kick-back prevention, and of course SawStop's revolutionary contact detection and brake system.

Features:
SawStop® Safety System
blade stops and retracts on accidental contact
protection is always on
performs continuous self checks
invisible protection  does not intefere with work
compatible with all standard blades
works on all woods and non-conductive materials
includes bypass switch for cutting metal
European style riving knife to minimize kickback
Low profile blade guard for narrow cuts
Quick-change mount for guard and riving knife
Large start/stop paddle for hands-free shut off
Main power switch with removable lock-out key
Magnetic contactor motor control
Blade shroud for improved dust collection
Zero-clearance insert
Extra heavy castings
Widely spaced trunnions
Infinitely adjustable trunnion assembly for precision alignment
Cast iron extension wings
Vertical slide blade elevation for increased stability
Powerful 3HP, 5HP or 7.5HP (optional) motor
Long-lasting V-ribbed belts
8 cast iron handwheels
Two access doors in cabinet
Powder-coated cabinet
Optional T-Glide" Fence System
Optional 36" or 52" extension table

"Hot Dog" Video

Specifications:
Overall saw dimensions: 44" w x 34" d x 34" h
Overal Saw Dimensions: 69 1/4" w x 36 1/2" d x 34" h (w/ optional fence & 36" rails) Overall Saw Dimensions: 85 1/4" w x 36 1/2" d x 34" h (w/ optional fence & 52" rails)
Cabinet footprint: 20" w x 25" d
Cast iron table: 24" w x 30" d, 44" w x 30" d (w/ extension wings)
Extension wing: 10" w x 30" d
Extension table (optional): 24" w x 30" d (36" rails), 40" w x 30" d (52" rails)
Weights (may vary with motor): 530 lbs (table saw only)
635 lbs (with optional fence, 36" rails & table)
685 lbs (with optional fence, 52" rails & table)
Shipping weight (approx.): 640 lbs (table saw only)
Blade: 60-tooth, professional grade, 5/8" arbor
Blade diameter: 10"
Blade tilt: Left
Blade kerf: 3mm
Blade plate thickness: 2mm
Max. depth of cut, blade at 0º: 3 1/8"
Max. depth of cut, blade at 45º: 2 1/4"
Max. rip, right of blade: 52 1/2" (with optional 52" rails)
36 1/2" (with optional 36" rails)
Max. rip, left of blade: 12 1/2"
Dado diameter: 8" (requires a separate brake cartridge)
Dado max. width: 13/16"
Arbor diameter at blade: 5/8"
Main bearing size: 62mm OD x 30mm ID
Second bearing size: 52mm OD x 25mm ID
Table in front of blade (max. elevation): 11"
Table behind blade (max. elevation): 9 3/4"
Arbor Runout: 0.001" Maximum Allowable Runout
Blade Lateral Movement Over Full Elevation Range: 0.006" Maximum
Table Flatness Measured Diagonally: 0.010" Maximum Gap
Overall Table and Extension Wing Flatness: 0.025" Maximum Gap
Blade Alignment with Miter Slot: 0.010" Maximum displacement
Deviation of Miter Gauge Indexing Stops from actual: ±0.25º
Alignment between Splitter and Blade: 0.010" Maximum difference
Miter slots: T-shaped, 3/4" at top, 1" at bottom, 3/8" deep
11 1/8" center-to-center
5 1/2" (arbor flange to center of right slot)
Dust collection port diameter: 4"
Riving knife / splitter thickness: 2mm
Blade guard: polycarbonate, extends only 5/8" to right of blade
Insert: zero clearance, phenolic core, melamine surfaces
Hand wheels: 8" diameter, cast iron with chrome handle
Belts: 2 V-ribbed belts
Motor: (all 50-60Hz, TEFC)
3 hp, 1 phase, 230 V, 13 A
5 hp, 1 phase, 230 V, 20.5 A (optional)
5 hp, 3 phase, 230 V, 13 A (optional)
5 hp, 3 phase, 480 V, 6.5 A (optional)
7.5 hp, 3 phase, 230 V, 17.8 A (optional)
7.5 hp, 3 phase, 480 V, 9 A (optional)