Denray Model 2800 Downdraft Table

Denray Model 2800 Downdraft Table
Click To Enlarge
  • Item #: 2800
  • Manufacturer: Denray
  * Marked fields are required.
Price $3,095.00
With a new tube filtration system, these tables are very popular with the small to medium sized shops. Many large shops use this model line when sanding small items to allow each sander to have their own station. The new system cleans with a 99% capture rate at 1 micron, creating a much superior filtration system than the previously used pleated filters. Standard features are 115 volt and casters and these features can be varied. They come with 4 - 4" swivel casters including two that lock. When mobility is important this model line is your best choice. If ordered with three phase, the table will come with a magnetic starter. The height can be requested from 29" without casters to any reasonable height. For any non-standard feature information or special requests, contact Denray Machine.

Size : 28 x 48" Height: 34½"
Weight : 310 lbs
CFM : 2800
Motor : 1 1/2 HP
Voltages : 115 volt
Sound Level : 70 Dec
Options : Exhaust Chimneys, Exhaust Mufflers, Magnehelic Gauges, HEPA Filter Banks, and 3-Sided 20" Shields

MOTORS are (TEFC) Totally Enclosed Fan Cooled. MOTORS for hazard locations like spray areas are available.
RECEPTACLES You must bring power into them from an electrical source outside the table.
CASTERS Standard on the 2800 series, optional on all others upon request, cannot be added later.
HEIGHTS may be altered, call for information.
TOPS are ¾" medium density fiber board (MDF) covered with a very durable sprayed-on urethane cover-non-marring, soft enough not to effect product being sanded.
HYDRAULIC MOTORS are available to run fans.
WARRANTY one year parts and labor except filters. Filters are standard filters and may be purchased from Denray or other suppliers.